Typo.

[breezed.git] / breezed.1

diff --git a/breezed.1 b/breezed.1
index e22dda4..750bc08 100644 (file)
--- a/breezed.1
+++ b/breezed.1
@@ -7,8 +7,8 @@ breezed - Fan control daemon
 .SH "DESCRIPTION"
 .PP
 \fBbreezed\fP is a daemon to adjust the fan speed according to the
 .SH "DESCRIPTION"
 .PP
 \fBbreezed\fP is a daemon to adjust the fan speed according to the

-computer temperature. It should be started through the adequate script
-in /etc/rc?.d.
+computer temperature. It should be started through the adequate
+systemd configuration or script in /etc/rc?.d.

 
 Every 5s, \fBbreezed\fP gathers all integer values from the thermal
 files, and takes the max as the overall temperature T. It then
 
 Every 5s, \fBbreezed\fP gathers all integer values from the thermal
 files, and takes the max as the overall temperature T. It then


@@ -23,7 +23,7 @@ of the fan speed before reducing it. The fan speed is set by writing
 the level itself if no alternative is provided with the temperature
 threshold.
 
 the level itself if no alternative is provided with the temperature
 threshold.
 

-Options can not be specified twice, neither on the command line nor in
+Options cannot be specified twice, neither on the command line nor in

 the configuration file.
 
 .SH "OPTIONS"
 the configuration file.
 
 .SH "OPTIONS"


@@ -60,10 +60,12 @@ to run it without arguments.
 Starting it with all the arguments on the commande line can be done
 for instance with
 
 Starting it with all the arguments on the commande line can be done
 for instance with
 

-breezed --no-configuration-file \
- --thermal-files /proc/acpi/thermal_zone/THM0/temperature,/proc/acpi/thermal_zone/THM1/temperature \
- --fan-file /proc/acpi/ibm/fan \
- --temperature-thresholds 52,54,56,58,60,62,64,68:full-speed
+.P
+.nf
+.B breezed --no-configuration-file \e
+.B \ \ \ \ \ \ \ \ --thermal-files /proc/acpi/thermal_zone/THM0/temperature,/proc/acpi/thermal_zone/THM1/temperature \e
+.B \ \ \ \ \ \ \ \ --fan-file /proc/acpi/ibm/fan \e
+.B \ \ \ \ \ \ \ \ --temperature-thresholds 52,54,56,58,60,62,64,68:full-speed

 
 which specifies that when the temperature raises above 52C, the fan
 level should be 1, when the temperature raises above 54C it should be
 
 which specifies that when the temperature raises above 52C, the fan
 level should be 1, when the temperature raises above 54C it should be