From 6473993b691c6280c4ad1d1d9a3b697eb0e05eb2 Mon Sep 17 00:00:00 2001 From: Francois Fleuret Date: Sat, 18 May 2013 13:03:14 +0200 Subject: [PATCH] Removed lame scripts. --- clean.sh | 57 ------- dirtohtml.sh | 76 --------- emacs-cvs-in-debian.sh | 149 ----------------- gma.sh | 132 --------------- hotspot.sh | 355 ----------------------------------------- html2text.sh | 28 ---- picstohtml.sh | 86 ---------- print.sh | 192 ---------------------- sshmount.sh | 54 ------- viewer.sh | 156 ------------------ withlock.sh | 41 ----- 11 files changed, 1326 deletions(-) delete mode 100755 clean.sh delete mode 100755 dirtohtml.sh delete mode 100755 emacs-cvs-in-debian.sh delete mode 100755 gma.sh delete mode 100755 hotspot.sh delete mode 100755 html2text.sh delete mode 100755 picstohtml.sh delete mode 100755 print.sh delete mode 100755 sshmount.sh delete mode 100755 viewer.sh delete mode 100755 withlock.sh diff --git a/clean.sh b/clean.sh deleted file mode 100755 index b6767a3..0000000 --- a/clean.sh +++ /dev/null @@ -1,57 +0,0 @@ -#!/bin/bash - -######################################################################### -# This program is free software: you can redistribute it and/or modify # -# it under the terms of the version 3 of the GNU General Public License # -# as published by the Free Software Foundation. # -# # -# This program is distributed in the hope that it will be useful, but # -# WITHOUT ANY WARRANTY; without even the implied warranty of # -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # -# General Public License for more details. # -# # -# You should have received a copy of the GNU General Public License # -# along with this program. If not, see . # -# # -# Written by and Copyright (C) Francois Fleuret # -# Contact for comments & bug reports # -######################################################################### - -TRASH=$(mktemp -d /tmp/trash.XXXXXX) - -# "pdf:fig" "pdf:png" "pdf:pgm" - -for i in "nav:tex" "snm:tex" "toc:tex" "blg:tex" \ - "idx:tex" "ilg:tex" "ind:tex" "lof:tex" "lot:tex" "lou:tex" \ - "dvi:tex" "log:tex" "aux:tex" "bbl:tex" \ - "ps:tex" "pdf:tex" "out:tex" "tpt:tex" "brf:tex" "vrb:tex" \ - "eps:fig" "eps:png" "eps:pgm" \ - "o:cc" "o:c" ; do - PRODUCED=$(echo $i | cut -f 1 -d:) - SOURCE=$(echo $i | cut -f 2 -d :) - for f in *.$PRODUCED; do - ORIGINAL=${f/.$PRODUCED/.$SOURCE} - if [ -f "${ORIGINAL}" ]; then - # if [ "${f}" -nt "${ORIGINAL}" ]; then - echo "Moving file $f to ${TRASH} ($ORIGINAL exists)" - mv $f ${TRASH} - # else - # echo "File $f is older than $ORIGINAL. Keeping both." - # fi - fi - done -done - -for i in "mozilla.ps" "a.out"; do - if [ -f "$i" ]; then - echo "move $i to ${TRASH}" - mv $i ${TRASH} - fi -done - -for f in $(find -type f -executable); do - if [ -f ${f}.cc ] || [ -f ${f}.c ]; then - echo "Moving $f to ${TRASH} (source code exists)" - mv $f ${TRASH} - fi -done diff --git a/dirtohtml.sh b/dirtohtml.sh deleted file mode 100755 index 82fc1ba..0000000 --- a/dirtohtml.sh +++ /dev/null @@ -1,76 +0,0 @@ -#!/bin/bash - -######################################################################### -# This program is free software: you can redistribute it and/or modify # -# it under the terms of the version 3 of the GNU General Public License # -# as published by the Free Software Foundation. # -# # -# This program is distributed in the hope that it will be useful, but # -# WITHOUT ANY WARRANTY; without even the implied warranty of # -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # -# General Public License for more details. # -# # -# You should have received a copy of the GNU General Public License # -# along with this program. If not, see . # -# # -# Written by and Copyright (C) Francois Fleuret # -# Contact for comments & bug reports # -######################################################################### - -function error () { - echo $1 1>&2 - exit 1 -} - -## Header ############################################################ - -cat < - - - - - - - - - - - -EOF - -## Body ############################################################## - -echo "

Directory content

" - -echo - -echo "
"
-
-for d in $(find . -maxdepth 1 -type d -name "[^.]?*" | sort); do
-    echo "${d}"
-
-    # most_recent=$(find ${d} -type f -exec stat --printf="%Y %n\n" '{}' \; | sort | tail -1 | awk '{print $4}')
-
-    # if [[ ${most_recent} ]]; then
-        # date=$(date -r ${most_recent})
-    # else
-        # date=$(date -r ${d})
-    # fi
-
-    # echo "${date} ${d}"
-done
-
-echo "
" - -echo - -## Footer ############################################################ - -cat < - - -EOF - -###################################################################### diff --git a/emacs-cvs-in-debian.sh b/emacs-cvs-in-debian.sh deleted file mode 100755 index 3c5ea25..0000000 --- a/emacs-cvs-in-debian.sh +++ /dev/null @@ -1,149 +0,0 @@ -#!/bin/bash - -######################################################################### -# This program is free software: you can redistribute it and/or modify # -# it under the terms of the version 3 of the GNU General Public License # -# as published by the Free Software Foundation. # -# # -# This program is distributed in the hope that it will be useful, but # -# WITHOUT ANY WARRANTY; without even the implied warranty of # -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # -# General Public License for more details. # -# # -# You should have received a copy of the GNU General Public License # -# along with this program. If not, see . # -# # -# Written by and Copyright (C) Francois Fleuret # -# Contact for comments & bug reports # -######################################################################### - -# You need at least the Debian packages: gcc make cvs texinfo -# libx11-dev libxft-dev libgif-dev libjpeg62-dev libpng12-dev -# libtiff4-dev libxpm-dev - -set -e - -DIR=/usr/local/emacs-snapshot - -while [[ $1 ]]; do - - case $1 in - - ################################################################ - - download) - - mkdir -p ${DIR} - - cd ${DIR} - - cvs -z3 \ - -d:pserver:anonymous@cvs.savannah.gnu.org:/sources/emacs \ - co emacs - - ;; - - ################################################################ - - compile) - - cd ${DIR}/emacs/ - - # I do not like gtk and such, hence the very limited - # configuration options. Feel free to add your own. - - ./configure --prefix=${DIR} \ - --with-xpm --with-jpeg --with-tiff --with-png \ - --with-x --with-xft - - make -k bootstrap - make install - - ;; - - ################################################################ - - install) - - if [[ -a /usr/share/emacs-snapshot ]]; then - echo "You have to remove /usr/share/emacs-snapshot." >&2 - exit 1 - fi - - # We do not know the version you downloaded. This ugly - # command will figure it out for you - - SHARE=$(find ${DIR}/share/emacs/ -maxdepth 1 -mindepth 1 -type d \ - | \grep "/[0-9\.]*$") - - if [[ ! -d "${SHARE}" ]]; then - echo "Can not find ${SHARE}, that's weird." >&2 - exit 1 - fi - - ln -s ${SHARE}/ /usr/share/emacs-snapshot - - for p in emacs ctags etags emacsclient ebrowse; do - # Install the binary as a link in /usr/bin - ln -s ${DIR}/bin/$p /usr/bin/$p-snapshot - # Tell the Debian system that the binary can be used - # as an alternative version - update-alternatives \ - --install /usr/bin/$p $p /usr/bin/$p-snapshot 23 - # Tell the Debian system that that new version should - # be used as default - update-alternatives \ - --set $p /usr/bin/$p-snapshot - done - - mkdir -p /etc/emacs-snapshot/site-start.d - - # Compile and install for that version of emacs all the - # emacs packages installed as Debian packages (vm, bbdb, - # etc.) - /usr/lib/emacsen-common/emacs-install emacs-snapshot - - ;; - - ################################################################ - - deinstall) - - # Remove that version of emacs from the list of versions - # for which Debian emacs-related packages should be - # compiled - /usr/lib/emacsen-common/emacs-remove emacs-snapshot - - rm -rf /etc/emacs-snapshot - - # Remove the alternatives - for p in emacs ctags etags emacsclient ebrowse; do - update-alternatives --remove $p /usr/bin/$p-snapshot - rm /usr/bin/$p-snapshot - done - - rm /usr/share/emacs-snapshot - ;; - - ################################################################ - - remove) - - rm -rf ${DIR} - - ;; - - ################################################################ - - *) - - echo "$0 " >&2 - exit 1 - - ;; - - esac - - shift 1 - -done diff --git a/gma.sh b/gma.sh deleted file mode 100755 index d914893..0000000 --- a/gma.sh +++ /dev/null @@ -1,132 +0,0 @@ -#!/bin/bash - -######################################################################### -# This program is free software: you can redistribute it and/or modify # -# it under the terms of the version 3 of the GNU General Public License # -# as published by the Free Software Foundation. # -# # -# This program is distributed in the hope that it will be useful, but # -# WITHOUT ANY WARRANTY; without even the implied warranty of # -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # -# General Public License for more details. # -# # -# You should have received a copy of the GNU General Public License # -# along with this program. If not, see . # -# # -# Written by and Copyright (C) Francois Fleuret # -# Contact for comments & bug reports # -######################################################################### - -set -e - -function usage () { - echo "gma.sh [--body] [--nospam] [--subject|--from|--to|--fromto|--sender] []" -} - -RESULT_MBOX="/tmp/gma" -KEEP_SPAM=1 - -if [[ -z "${MAIL_ARCHIVE_DIR}" ]]; then - echo "Undefined \$MAIL_ARCHIVE_DIR" >&2 - exit 1 -fi - -if [[ $(which ionice) ]]; then - IONICE="ionice -c3" -else - IONICE="" -fi - -HEADER_ONLY="-H" - -while [[ $1 ]]; do - - case $1 in - - "--help"|"-h") - usage - exit 0 - ;; - - "--body") - HEADER_ONLY="" - ;; - - "--intense") - IONICE="" - ;; - - "--nospam") - KEEP_SPAM=0 - ;; - - "--from") - RE_PREFIX="^From:.*" - ;; - - "--to") - RE_PREFIX="^To:.*" - ;; - - "--fromto") - RE_PREFIX="^(From|To):.*" - ;; - - "--sender") - RE_PREFIX="^Sender:.*" - ;; - - "--subject") - RE_PREFIX="^Subject:.*" - ;; - - *) - if [[ ${PATTERN} ]]; then - # If we already have the pattern to match in the - # message, get the new argument as a pattern for the - # filename - if [[ ${FILE_PATTERN} ]]; then - usage - exit 1 - else - FILE_PATTERN="${MAIL_ARCHIVE_DIR}/${1}/*/*" - SIZE_FILE_PATTERN="${MAIL_ARCHIVE_DIR}/${1}" - fi - else - PATTERN=$1 - fi - ;; - esac - shift -done - -if [[ -z "${PATTERN}" ]]; then - usage - exit 1 -fi - -[[ ${FILE_PATTERN} ]] || FILE_PATTERN="${MAIL_ARCHIVE_DIR}/*/*/*" -[[ ${SIZE_FILE_PATTERN} ]] || SIZE_FILE_PATTERN="${MAIL_ARCHIVE_DIR}" - -SIZE=$(\dus ${SIZE_FILE_PATTERN} | cut -f 1 -d" ") - -echo "Looking for ${RE_PREFIX}${PATTERN}" -echo " in ${FILE_PATTERN}" -echo " writing result in ${RESULT_MBOX}" - -if [[ ${KEEP_SPAM} == "1" ]]; then - - ${IONICE} cat ${FILE_PATTERN} \ - | pv -s ${SIZE} -p -t -e - \ - | mboxgrep ${HEADER_ONLY} -i "${RE_PREFIX}${PATTERN}" > ${RESULT_MBOX} - -else - - ${IONICE} cat ${FILE_PATTERN} \ - | pv -s ${SIZE} -p -t -e - \ - | mboxgrep ${HEADER_ONLY} -i "${RE_PREFIX}${PATTERN}" \ - | mboxgrep ${HEADER_ONLY} -v '^Subject:.*SPAM' > ${RESULT_MBOX} - -fi - -echo "Found "$(grep ^"From " ${RESULT_MBOX} | wc -l)" messages." diff --git a/hotspot.sh b/hotspot.sh deleted file mode 100755 index a8a27ae..0000000 --- a/hotspot.sh +++ /dev/null @@ -1,355 +0,0 @@ -#!/bin/bash - -######################################################################### -# This program is free software: you can redistribute it and/or modify # -# it under the terms of the version 3 of the GNU General Public License # -# as published by the Free Software Foundation. # -# # -# This program is distributed in the hope that it will be useful, but # -# WITHOUT ANY WARRANTY; without even the implied warranty of # -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # -# General Public License for more details. # -# # -# You should have received a copy of the GNU General Public License # -# along with this program. If not, see . # -# # -# Written by and Copyright (C) Francois Fleuret # -# Contact for comments & bug reports # -######################################################################### - -INTERFACE=${WIFI_INTERFACE} - -[[ ${INTERFACE} ]] || INTERFACE=wlan0 - -MTU=512 - -SCAN_OUTPUT=$(mktemp /tmp/scanresult.XXXXXX) -SHOW_CLOSED=0 - -###################################################################### - -VT_CURSOR_OFF=$'\033[?25l' -VT_CURSOR_ON=$'\033[?25h' - -VT_RESET=$'\033[0m' -VT_BOLD=$'\033[1m' -VT_UNDERLINE=$'\033[4m' -VT_BLINK=$'\033[5m' - -VT_BLACK_FG=$'\033[30m' -VT_RED_FG=$'\033[31m' -VT_GREEN_FG=$'\033[32m' -VT_YELLOW_FG=$'\033[33m' -VT_BLUE_FG=$'\033[34m' -VT_MAGENTA_FG=$'\033[35m' -VT_CYAN_FG=$'\033[36m' -VT_WHITE_FG=$'\033[37m' - -VT_BLACK_BG=$'\033[40m' -VT_RED_BG=$'\033[41m' -VT_GREEN_BG=$'\033[42m' -VT_YELLOW_BG=$'\033[43m' -VT_BLUE_BG=$'\033[44m' -VT_MAGENTA_BG=$'\033[45m' -VT_CYAN_BG=$'\033[46m' -VT_WHITE_BG=$'\033[47m' - -###################################################################### - -function cleanup-before-quit () { - echo ${VT_CURSOR_ON} - stty "$stty_state" - rm -f ${SCAN_OUTPUT} - if [[ "${interface_was_up}" == "" ]]; then - echo "The interface was down." - ifconfig ${INTERFACE} down - fi -} - -function sigint-handler () { - cleanup-before-quit - echo "Interrupted" - exit 0 -} - -function scan () { - echo - echo " Scanning ..." - iwconfig ${INTERFACE} ap off essid "" - iwlist ${INTERFACE} scan | \ - sed -e "s/^[\t ]*//" | grep ^"Cell\|ESSID\|Quality\|Encryption" | \ - sed \ - -e "s/Cell [0-9]* - Address: \([0-9]*\)/AP,\1/" \ - -e "s/^ *ESSID:\\\"\([^\\\"]*\)\\\".*$/ESSID,\1/" \ - -e "s/Quality=\([0-9]*\).*$/QUALITY,\1/" \ - -e "s/Encryption key:/ENCRYPTION,/" | \ - awk 'BEGIN { FS="," } - { - if($1 == "ESSID") { essid=$2 } - else if($1 == "AP") { ap=$2 } - else if($1 == "QUALITY") { quality=$2; } - else if($1 == "ENCRYPTION") { - if($2 == "off") { - open=" " - printf("%d,%s,%s,%s\n",quality,open,essid,ap); - } else { - if('${SHOW_CLOSED}') { - open="(closed)" - printf("%d,%s,%s,%s\n",quality,open,essid,ap); - } - } - } - }' | \ - sort -rn > ${SCAN_OUTPUT} - - number_of_aps=$(wc -l ${SCAN_OUTPUT} | awk '{print $1}') - - chmod a+rw ${SCAN_OUTPUT} -} - -function redisplay () { - clear - - echo - echo -n " ${VT_UNDERLINE}Hotspot selection${VT_RESET}" - if [[ $SHOW_CLOSED == 0 ]]; then - echo " (show only open networks)" - else - echo - fi - echo - echo " [s,r] scan [m] switch the free-only view and scan [q] quit" - echo " [e] select essid + dhcp [a] selects essid/ap + dhcp [k] kill dhcp and quit" - echo - - for i in $(ifconfig -s | grep -E -v ^lo\|Iface\|wmaster | awk '{print $1}'); do - echo " Warning: $i is up" - done - echo - - if [[ ${number_of_aps} == "0" ]]; then - echo " ${VT_RED_FG}${VT_BOLD}No access point detected.${VT_RESET}" - else - - awk < ${SCAN_OUTPUT} 'BEGIN { nb=1; FS="," } - { - if(nb == '$current_ap') { - printf(" =>"); - } else { - printf(" "); - } - if($2 == "(closed)") { - printf("'${VT_RED_FG}'"); - printf("% 3s %s \"%s\" %s'${VT_RESET}'\n", $1, $2, $3, $4); - } else { - printf("'${VT_GREEN_FG}'"); - printf("% 3s %s \"%s\" %s'${VT_RESET}'\n", $1, $2, $3, $4); - } - nb=nb+1; - }' - fi -} - -function get-selected-essid-ap () { - cat ${SCAN_OUTPUT} | \ - awk 'BEGIN { nb=1; FS="," } - { - if(nb == '$current_ap') { - printf("%s,%s\n", $3, $4); - } - nb=nb+1; - }' -} - -function kill-dhcp () { - PID=$(pidof dhclient) - if [[ ${PID} ]]; then - echo "Killing dhclient" - dhclient -x ${INTERFACE} - fi -} - -###################################################################### - -function process-key () { - - case $1 in - e) # Selects essid + dhcp - SELECTED=$(get-selected-essid-ap) - ESSID=$(echo ${SELECTED} | cut -f 1 -d,) - echo "Running DHCP on ${INTERFACE} for ESSID \"${ESSID}\"." - iwconfig ${INTERFACE} ap auto essid "${ESSID}" - kill-dhcp - echo - dhclient ${INTERFACE} - # if [[ $? == 0 ]]; then - # iwconfig ${INTERFACE} > ~/.hotspot-ap - # fi - ifconfig ${INTERFACE} mtu ${MTU} - interface_was_up=1 - cont=0 - ;; - - "return"|a) # Selects essid/ap + dhcp - SELECTED=$(get-selected-essid-ap) - ESSID=$(echo ${SELECTED} | cut -f 1 -d,) - AP=$(echo ${SELECTED} | cut -f 2 -d,) - echo "Running DHCP on ${INTERFACE} for ESSID \"${ESSID}\" and AP ${AP}." - iwconfig ${INTERFACE} ap ${AP} essid "${ESSID}" - kill-dhcp - echo - dhclient ${INTERFACE} - # if [[ $? == 0 ]]; then - # iwconfig ${INTERFACE} > ~/.hotspot-ap - # fi - ifconfig ${INTERFACE} mtu ${MTU} - interface_was_up=1 - cont=0 - ;; - - k) # kill dhcp - echo "Killing DHCP and bringing down ${INTERFACE}." - kill-dhcp - ifconfig ${INTERFACE} down - cont=0 - ;; - - r|s) # re-scanning the access points - scan - redisplay - ;; - - m) # Switching the mode to show the protected spots - SHOW_CLOSED=$((1-SHOW_CLOSED)) - scan - redisplay - ;; - - "down"|n) - current_ap=$((current_ap+1)) - if [[ $current_ap -gt $number_of_aps ]]; then - current_ap=$number_of_aps - fi - redisplay - ;; - - "up"|p) - current_ap=$((current_ap-1)) - if [[ $current_ap -lt 1 ]]; then - current_ap=1 - fi - redisplay - ;; - - "esc-esc"|q) - echo " Quit." - cont=0 - ;; - - *) - ;; - esac -} - -###################################################################### -## The main - -if [[ $1 == "-k" ]]; then - echo "Killing DHCP and bringing down ${INTERFACE}." - kill-dhcp - ifconfig ${INTERFACE} down - exit 1 -fi - -trap cleanup-before-quit EXIT - -stty_state=$(stty -g) - -trap sigint-handler SIGHUP SIGINT SIGQUIT SIGABRT SIGTERM - -stty -echo -icrnl -icanon -xcase min 1 time 0 - -echo ${VT_CURSOR_OFF} - -current_ap=1 -cont=1 -current_keymap=default - -interface_was_up=$(ifconfig | grep ${INTERFACE}) - -ifconfig ${INTERFACE} up - -scan - -redisplay - -while [[ ${cont} == 1 ]]; do - - CHAR=$(dd bs=1 count=1 2>/dev/null) - - case ${current_keymap} in - default) ################################################## - case ${CHAR} in - - [a-z]) - process-key ${CHAR} - ;; - - " ") - process-key "return" - ;; - - "") - process-key "down" - ;; - - "") - process-key "up" - ;; - - "") #$'\033'") - current_keymap=escape - ;; - - *) - ;; - esac - ;; - - escape) ################################################## - case ${CHAR} in - "$'\033'") - process-key "esc-esc" - ;; - "[") - current_keymap=cursor - ;; - *) - current_keymap=default - ;; - esac - ;; - - cursor) ################################################## - - current_keymap=default - - case ${CHAR} in - A) - process-key "up" - ;; - B) - process-key "down" - ;; - *) - ;; - esac - ;; - - *) - echo "Unknown keymap. This is an internal and weird bug." - cont=0 - ;; - esac - -done diff --git a/html2text.sh b/html2text.sh deleted file mode 100755 index fe10cc0..0000000 --- a/html2text.sh +++ /dev/null @@ -1,28 +0,0 @@ -#!/bin/bash - -######################################################################### -# This program is free software: you can redistribute it and/or modify # -# it under the terms of the version 3 of the GNU General Public License # -# as published by the Free Software Foundation. # -# # -# This program is distributed in the hope that it will be useful, but # -# WITHOUT ANY WARRANTY; without even the implied warranty of # -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # -# General Public License for more details. # -# # -# You should have received a copy of the GNU General Public License # -# along with this program. If not, see . # -# # -# Written by and Copyright (C) Francois Fleuret # -# Contact for comments & bug reports # -######################################################################### - -set -e - -echo "(From html)" -echo - -elinks -no-numbering -no-references -dump -dump-width 80 -dump-charset utf-8 | \ - sed -e "s/\[IMG\]//g" -e "s/^[ \t]*$//" -e "s/^ //" | \ - awk '/^$/{ if (! blank++) print; next } { blank=0; print }' - diff --git a/picstohtml.sh b/picstohtml.sh deleted file mode 100755 index 70310c2..0000000 --- a/picstohtml.sh +++ /dev/null @@ -1,86 +0,0 @@ -#!/bin/bash - -######################################################################### -# This program is free software: you can redistribute it and/or modify # -# it under the terms of the version 3 of the GNU General Public License # -# as published by the Free Software Foundation. # -# # -# This program is distributed in the hope that it will be useful, but # -# WITHOUT ANY WARRANTY; without even the implied warranty of # -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # -# General Public License for more details. # -# # -# You should have received a copy of the GNU General Public License # -# along with this program. If not, see . # -# # -# Written by and Copyright (C) Francois Fleuret # -# Contact for comments & bug reports # -######################################################################### - -function error () { - echo $1 1>&2 - exit 1 -} - -###################################################################### -# Create the directories - -if [[ -z $1 ]] || [[ -z $2 ]]; then - echo "$0 " - exit 1 -fi - -if [[ ! -d $1 ]]; then - echo "Can not find directory $1" - exit 1 -fi - -mkdir $2 || error "Can not create $2." -mkdir $2/pics || error "Can not create $2/pics" -mkdir $2/thumbs || error "Can not create $2/thumbs" - -###################################################################### -# Generate the html header - -cat > $2/index.html < - - - - - - - - - - - -EOF - -###################################################################### -# Generate the thumbnails, html content and copy the images - -for i in $(find $1 -type f | sort); do - FILENAME=$(basename $i) - convert 2> /dev/null -geometry 180x120 $i $2/thumbs/${FILENAME}.jpg - - if [[ $? == 0 ]]; then - echo "Copying ${FILENAME}" - cp $i $2/pics/${FILENAME} - echo "" >> $2/index.html - else - echo "Ignoring $i (not an image?)" - fi - -done - -###################################################################### -# Generate the footer of the html file - -cat >> $2/index.html < - - -EOF - -###################################################################### diff --git a/print.sh b/print.sh deleted file mode 100755 index c3815f4..0000000 --- a/print.sh +++ /dev/null @@ -1,192 +0,0 @@ -#!/bin/bash - -######################################################################### -# This program is free software: you can redistribute it and/or modify # -# it under the terms of the version 3 of the GNU General Public License # -# as published by the Free Software Foundation. # -# # -# This program is distributed in the hope that it will be useful, but # -# WITHOUT ANY WARRANTY; without even the implied warranty of # -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # -# General Public License for more details. # -# # -# You should have received a copy of the GNU General Public License # -# along with this program. If not, see . # -# # -# Written by and Copyright (C) Francois Fleuret # -# Contact for comments & bug reports # -######################################################################### - -set -e - -# $Id: print.sh,v 1.19 2006-11-10 15:53:23 fleuret Exp $ - -if [ ! "$*" ]; then - echo "Need filenames to print!" - exit 1 -fi - -tmp=$(mktemp /tmp/print.ps.XXXXXX) -opts="" -printing_cmd="lpr" - -function cleanup-before-exit () { - rm ${tmp} -} - -trap cleanup-before-exit EXIT - -for arg in "$@"; do - - if [ "${arg}" == "-h" ] || [ "${arg}" == "--help" ]; then - - # The help option - - echo $(basename $0)" [ ... ] [[ ... ] ... ]" - echo - echo "A dumb printing utility. Options:" - echo - echo "-2pp two pages per page" - echo "-4pp four pages per page" - echo "-8pp eight pages per page" - echo "-gv displays the result with gv instead of printing" - echo "-stdout send the result to the standard output" - echo "-P uses instead of $PRINTER" - echo - echo "Contact " - echo "Version \$Id: print.sh,v 1.19 2006-11-10 15:53:23 fleuret Exp $" - - exit 0 - - elif [[ ${arg} == "-"* ]]; then - - # else, if it starts with '-' it is an option - - opts="${opts} ${arg}" - - else - - # else, it is a filename to print - - if [ -e "${arg}" ]; then - - TYPE=$(file -L "${arg}") - - noprint="" - - case $TYPE in - - *"image data"*) - convert "${arg}" ps:${tmp} - ;; - - *"TeX DVI"*) - dvips -o ${tmp} "${arg}" - ;; - - *"FIG image"*) - fig2dev -L ps "${arg}" > ${tmp} - ;; - - *"PostScript"*) - cp "${arg}" ${tmp} - ;; - - *"PDF"*) - pdf2ps "${arg}" ${tmp} - ;; - - *" text"*) - # a2ps -B -R --columns=1 -f 8 -o ${tmp} "${arg}" - # if isutf8 -q ${tmp}; then - # echo "Can not print uf8 text." - # exit 1 - # else - a2ps --media=A4 --user-option=lp -o ${tmp} "${arg}" - # fi - ;; - - *"gzip compressed"*) - echo "Unzipping " - zcat "${arg}" > ${tmp} - noprint=1 - $0 ${opts} ${tmp} - ;; - - *) - echo "Unable to handle type \"$TYPE\""; noprint=1 - ;; - - - esac - - if [ ! "$noprint" ]; then - - # We apply all the filters seen up to now - - for f in ${opts}; do - case $f in - -2pp) - tmp2=$(mktemp /tmp/filter.ps.XXXXXX) - psnup -d0 -m5 -2 < ${tmp} > ${tmp2} - mv ${tmp2} ${tmp} - ;; - -4pp) - tmp2=$(mktemp /tmp/filter.ps.XXXXXX) - psnup -d0 -m5 -4 < ${tmp} > ${tmp2} - mv ${tmp2} ${tmp} - ;; - -8pp) - tmp2=$(mktemp /tmp/filter.ps.XXXXXX) - psnup -d0 -m5 -8 < ${tmp} > ${tmp2} - mv ${tmp2} ${tmp} - ;; - -gv) - printing_cmd="gv" - ;; - - -stdout) - printing_cmd="cat" - ;; - - -P*) - printing_cmd="lpr" - PRINTER=$(echo $f | sed -e s/^-P//) - if [[ -z "$PRINTER" ]]; then - echo "Error in the printer name. Use -P with no space." - lpstat -a - exit 1 - else - echo "Using printer \"$PRINTER\"" - fi - ;; - *) - echo "Unknown option $f" - exit 1;; - esac - done - - if [[ "$printing_cmd" == "lpr" ]]; then - echo "Printing on printer '$PRINTER'" - show_queue=1 - fi - - ${printing_cmd} ${tmp} - - fi - - else - - echo "Can not find file ${arg}" - - fi - - fi - -done - -if [[ ${show_queue} ]]; then - lpq -fi - -exit 0 diff --git a/sshmount.sh b/sshmount.sh deleted file mode 100755 index 3cd7f51..0000000 --- a/sshmount.sh +++ /dev/null @@ -1,54 +0,0 @@ -#!/bin/bash - -######################################################################### -# This program is free software: you can redistribute it and/or modify # -# it under the terms of the version 3 of the GNU General Public License # -# as published by the Free Software Foundation. # -# # -# This program is distributed in the hope that it will be useful, but # -# WITHOUT ANY WARRANTY; without even the implied warranty of # -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # -# General Public License for more details. # -# # -# You should have received a copy of the GNU General Public License # -# along with this program. If not, see . # -# # -# Written by and Copyright (C) Francois Fleuret # -# Contact for comments & bug reports # -######################################################################### - -set -e - -hostname=$1 -remotepath=$2 -localpath=/mnt/sshfs/${hostname}/${remotepath} - -if [[ $1 == "--help" ]] || [[ $1 == "-h" ]]; then - cat < []] - -Mount the remote path on /mnt/sshfs// if it is -not already mounted. Umount it otherwise. - -If no argument is provided, tries to umount all the mounted sshfs -volumes. -EOF - - exit 0 -fi - -if [[ $1 ]]; then - if [[ $(mount | grep ${hostname}:${remotepath}) ]]; then - fusermount -u ${localpath} - echo "sshfs umounted from ${localpath}." - else - mkdir -p ${localpath} - sshfs -o idmap=user -C ${hostname}:${remotepath} ${localpath} - echo "Remote ${hostname}:${remotepath} mounted on ${localpath}." - fi -else - for v in $(mount | grep fuse.sshfs | cut -f 3 -d' '); do - fusermount -u ${v} - echo "sshfs umounted from ${v}" - done -fi diff --git a/viewer.sh b/viewer.sh deleted file mode 100755 index 98682d4..0000000 --- a/viewer.sh +++ /dev/null @@ -1,156 +0,0 @@ -#!/bin/sh - -######################################################################### -# This program is free software: you can redistribute it and/or modify # -# it under the terms of the version 3 of the GNU General Public License # -# as published by the Free Software Foundation. # -# # -# This program is distributed in the hope that it will be useful, but # -# WITHOUT ANY WARRANTY; without even the implied warranty of # -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # -# General Public License for more details. # -# # -# You should have received a copy of the GNU General Public License # -# along with this program. If not, see . # -# # -# Written by and Copyright (C) Francois Fleuret # -# Contact for comments & bug reports # -######################################################################### - -set -e - -function getgeometry () { - XSETUP="/tmp/xsetup" - - if [[ -f "${XSETUP}" ]]; then - - ACTIVE_SCREEN_GEOMETRY=($(awk '{ - if(0>= $5 && 0 < $5+$3) { print $2" "$3" "$4" "$5 } - }' < ${XSETUP})) - - ACTIVE_WIDTH=${ACTIVE_SCREEN_GEOMETRY[0]} - ACTIVE_HEIGHT=${ACTIVE_SCREEN_GEOMETRY[1]} - ACTIVE_X=${ACTIVE_SCREEN_GEOMETRY[2]} - ACTIVE_Y=${ACTIVE_SCREEN_GEOMETRY[3]} - - GEOMETRY="${ACTIVE_WIDTH}x${ACTIVE_HEIGHT}+${ACTIVE_X}+${ACTIVE_Y}" - fi -} - -# This is my universal file viewer - -# If no argument is given, we pick the most recent file - -if [[ ! "$1" ]]; then - file=$(\ls -tQ | head -1 | sed -e s/\"//g) - echo "Most recent is ${file}" - $0 "${file}" - exit 0 -fi - -# If there were arguments, we loop through them - -echo "Viewing $@" - -while [[ "$1" ]]; do - - file="$1" - - # file=$(\ls -tQd $1 | head -1 | sed -e s/\"//g) - - # if [[ ! -a "${file}" ]]; then - # echo "Can not find file $1" - # exit 1 - # fi - - type=$(file -L "${file}") - - case ${type} in - - *"FIG image text"*) - echo "${file}" - temp=$(mktemp /tmp/view.XXXXXX) - fig2dev -L pdf "${file}" ${temp} - # xpdf -g 800x600+8+8 ${temp} - getgeometry - xpdf -g ${GEOMETRY} ${temp} - rm ${temp} - ;; - - *"image"*) - echo "${file}" - # feh -g 800x600 "${file}" - getgeometry - feh -g ${GEOMETRY} "${file}" - ;; - - *"TeX DVI"*) - echo "${file}" - xdvi "${file}" - ;; - - # *"FIG image"*) - # echo "${file}" - # xfig "${file}" - # ;; - - *"PostScript"*) - echo "${file}" - gv "${file}" - ;; - - *"PDF"*) - echo "${file}" - # xpdf -g 800x600+8+8 "${file}" - getgeometry - xpdf -g ${GEOMETRY} "${file}" - ;; - - *"WAVE audio"*) - echo "${file}" - esdplay "${file}" - ;; - - *"MP3"*|*"MPEG"*|*"movie"*|*"video"*|*"AVI"*|*"Microsoft ASF"*) - mplayer -quiet "${file}" - ;; - - *" text"*) - HEIGHT=$(stty size | awk '{print $1}') - if [[ $(wc -l "${file}" | cut -f 1 -d' ') -gt $((HEIGHT-2)) ]]; then - less "${file}" - else - cat "${file}" - fi - ;; - - *"tar archive"*) - tar ztf "${file}" - ;; - - *"Microsoft Word Document"*) - antiword "${file}" | less - ;; - - *"directory"*) - echo ""${file}":"; ls -lt "${file}" - ;; - - *"gzip compressed"*) - temp=$(mktemp /tmp/view.XXXXXX) - echo "Decompressing to ${temp}" - zcat "${file}" > ${temp} - $0 ${temp} - echo "Removing ${temp}" - rm ${temp} - ;; - - *) - echo "Unable to handle ${type}" - ;; - - esac - - shift - -done diff --git a/withlock.sh b/withlock.sh deleted file mode 100755 index 980deb1..0000000 --- a/withlock.sh +++ /dev/null @@ -1,41 +0,0 @@ -#!/bin/bash - -######################################################################### -# This program is free software: you can redistribute it and/or modify # -# it under the terms of the version 3 of the GNU General Public License # -# as published by the Free Software Foundation. # -# # -# This program is distributed in the hope that it will be useful, but # -# WITHOUT ANY WARRANTY; without even the implied warranty of # -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # -# General Public License for more details. # -# # -# You should have received a copy of the GNU General Public License # -# along with this program. If not, see . # -# # -# Written by and Copyright (C) Francois Fleuret # -# Contact for comments & bug reports # -######################################################################### - -# This command allows to call another command with a lockfile to avoid -# concurrent executions for the same user. - -set -e - -if [[ ! $1 ]]; then - echo "withlock.sh [command args]" - exit 1 -fi - -LOCKFILE=/tmp/lock$(which $1 | sed -e "s:/:-:g").${USER} - -(set -C && : > ${LOCKFILE}) 2> /dev/null - -if [ $? != "0" ]; then - echo "Lockfile ${LOCKFILE} exists." >&2 - exit 1 -fi - -trap 'rm ${LOCKFILE}' EXIT - -$* -- 2.20.1